IBM PC 300PL User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Chapter 2. System board features
Figure 3. Supported VGA video modes
Mode
(hex)
Display
mode Screen resolution Colors
Buffer start
(hex)
Dot
clock
(MHz)
Sweep
rate
(kHz)
Refresh
rate (Hz)
00 Text 40 x 25 characters 2 B8000 28.322 31.5 70
01 Text 40 x 25 characters 16 B8000 28.322 31.5 70
02 Text 80 x 25 characters B/W B8000 28.322 31.5 70
03 Text 80 x 25 characters 16 B8000 28.322 31.5 70
04 Graphics 320 x 200 pixels 4 B8000 25.175 31.5 70
05 Graphics 320 x 200 pixels 4 B8000 25.175 31.5 70
06 Text 640 x 200 pixels 2 B8000 25.175 31.5 70
07 Text 80 x 25 characters Mono B0000 28.322 31.5 70
0D Graphics 320 x 200 pixels 16 A0000 25.175 31.5 70
0E Graphics 640 x 200 pixels 16 A0000 25.175 31.5 70
0F Graphics 640 x 350 pixels Mono A0000 25.175 31.5 70
10 Graphics 640 x 350 pixels 16 A0000 25.175 31.5 70
11 Graphics 640 x 480 pixels 2 A0000 25.175 31.5 60
12 Graphics 640 x 480 pixels 16 A0000 25.175 31.5 60
13 Graphics 320 x 200 pixels 256 A0000 25.175 31.5 70
Monitor support
The video subsystem provides a 15-pin monitor connector on the system board. For information on
connector pin assignments, see Appendix A, “Connector pin assignments” on page 25.
Video memory
The video memory interface is controlled by an integrated graphics subsystem on the AGP adapter with
up to 16 MB video RAM for 2D/3D graphics.
Audio subsystem
The PC 300PL Personal Computer comes with an integrated audio controller. These models are capable
of playing and recording sounds and support SoundBlaster, Adlib, and Microsoft Windows Sound System
applications.
The device drivers for the preinstalled audio adapter are on the hard disk. The device drivers are also
available on the
Product Recovery CD
or
Device Driver and IBM Enhanced Diagnostics CD
that comes
with the computer.
If you connect an optional device to the audio adapter, follow the instructions provided by the
manufacturer. (Note that device drivers might be required. If necessary, contact the manufacturer for
information on these device drivers.)
The following connectors are available on the integrated audio controller:
Line/headphone out
port for connecting powered speakers. To hear audio from the adapter you must
connect a set of speakers to the Line out port. These speakers must be powered with a built-in
amplifier. In general, any powered speakers designed for use with personal computers can be used
with the audio subsystem. These speakers are available with a wide range of features and power
outputs.
Line in
port for connecting musical devices, such as a portable CD player or stereo system.
Chapter 2. System board features 9
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

Comments to this Manuals

No comments