IBM 4560SLX User Manual download pdf (Page 50)

Power

This option initiates a library power-down operation. Figure 49 shows the

confirmation screen that is displayed when this option is selected. The library

moves the shuttle assembly to the parked position before powering down.

Using tape cartridges

This section describes how to remove magazines, insert cartridges into a magazine,

use the mail slot, and use bar codes.

Removing magazines

A magazine must be removed from the library in order to replace tape cartridges.

Before you remove a magazine, make sure the slot you want to use is not already

reserved for a tape cartridge that is in a tape drive. The safest way to do this is to

unload all tape drives before removing a magazine. You can unload all the tape

drives either through your host system software or by using the Move Media

option on the library default screen.

You must manually remove the library magazines. To access the magazines, use

the Magazine Access Option Default screen. This option enables you to open the

left or right magazine doors separately or both magazine doors at the same time.

After opening the appropriate magazine door, pull the magazine out and away

from the library chassis as shown in Figure 50 on page 41.

Figure 48. Status screen

Figure 49. Power Down Initiation screen

40 4560SLX Tape Library: User’s Guide

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 127 128

No comments

IBM 4560SLX User Manual Page 50