Ibm 1-Port USB Print Server User Manual

1-Port USB Print Server Hardware User’s Guide Rev. 01 (July, 2002) Made In Taiwan

- 10 - ♦ Subnet Mask – 255.255.255.0 Please note that the PC’s IP address must correspond with the print server’s IP address in the same segment for

- 11 - 2 2 INSTALLATION This chapter explains how to install your print server and connect it to the network. It also describes the automatic powe

- 12 - 7. Connect the DC end of the AC Power adapter to the DC power input socket of the print server and the AC end to the wall outlet. This w

- 13 - USB LED Pattern Error Type Flash slowly Firmware reload required Steady on DRAM error 1 long - 2 short Timer INT error 1 long - 3 short F

- 14 - A 3 PRODUCT SPECIFICATIONS Printer Connection Printer Interface: One USB port, compliant with USB 1.1 standard Network Connection Network Inter

- 15 - Operating System Support Windows 95/98/Me, Windows NT/2000/XP; NetWare 5.x (NDPS LPR remote printing); HP-UX UNIX, Sun OS, Solaris, SCO UNIX

- 2 - RECYCLABLE

- 3 - TABLE OF CONTENTS 0 ABOUT THIS GUIDE...4 1 INTROD

- 4 - 0 ABOUT THIS GUIDE This manual describes the 1-Port USB Print Server, including full descriptions of its features, detailed installation procedu

- 5 - 1 1 INTRODUCTION Congratulations on purchasing your 1-Port USB Print Server, the easiest and fastest way to deploy printers on your network. Th

- 6 - General Features ♦ Compact pocket size ♦ Compliant with USB 1.1 ♦ Equipped one 10Base-T/100BASE-TX LAN port ♦ Multi protocol support is idea

- 7 - to your file servers through the network, the printer can be stationed at the location of maximum convenience to users. This 1-Port USB Print S

- 8 - External Features This section describes the external features of your 1-Port USB Print Server. Front View There are three green LED indic

- 9 - Rear View Component Description DC Power Input The DC power input connector is located on the Print Server’s rear panel and is labeled D