IBM 3630 M4 User's Guide download pdf (Page 7)

IBM System x3630 M4 7

Standard specifications

The following table lists the standard specifications.

Table 1. Standard specifications (part 1)

Components Specification

Form factor 2U rack.

Processor Up to two Intel Xeon processor E5-2400 product family processors with eight cores (up to 2.3

GHz), six cores (up to 2.4 GHz) or four cores (up to 2.2 GHz), one QPI link up to 8.0 GTps,

up to 1600 MHz memory speed, up to 20 MB L3 cache; or

one Intel Xeon processor E5-1400 product family processor with four cores up to 2.8 GHz, 10

MB L3 cache, and 1333 MHz memory speed (CTO only); or

one Intel Pentium processor 1400 product family processor with two cores up to 2.8 GHz, 5

MB L3 cache, and 1066 MHz memory speed (CTO only).

Chipset Intel C600 series.

Memory Up to 12 DIMM sockets (six DIMMs per processor). LRDIMMs, RDIMMs, and UDIMMs are

supported, but memory types cannot be intermixed. DIMM speeds are up to 1600 MHz.

Memory

maximums

With LRDIMMs: Up to 384 GB with 12x 32 GB RDIMMs and two processors

With RDIMMs: Up to 192 GB with 12x 16 GB RDIMMs and two processors

With UDIMMs: Up to 48 GB with 12x 4 GB UDIMMs and two processors

Memory protection ECC, Chipkill, memory mirroring, and memory rank sparing.

Disk drive bays Up to eight 3.5-inch SATA simple-swap drive bays, up to eight 3.5-inch SAS/SATA hot-swap

drive bays, or up to fourteen 3.5-inch SAS/SATA hot-swap drive bays.

Maximum internal

storage

Up to 42 TB with 3 TB 3.5-inch NL SAS/SATA HS HDDs, up to 24 TB with 3 TB 3.5-inch

SATA SS HDDs, or up to 7.2 TB with 512 GB 3.5-inch SATA HS SSDs. An intermix of

SAS/SATA is supported.

RAID support RAID 0 and 1 with C105. RAID 0, 1, and 10 with M1115 or M5110. Upgrades to RAID 5 and

50 are available for M1115. Upgrades to RAID 5 and 50 are available for M5110

(zero-cache; 512 MB battery-backed cache; 512 MB or 1 GB flash-backed cache). Upgrade

to RAID 6 or 60 is available for M5110 with caches.

Optical drive bays One, for models with up to eight 3.5-inch drive bays. Support for optional DVD-ROM or

multiburner.

Tape drive bays Optional, for models with up to eight 3.5-inch drive bays. Tape Enablement Kit is required to

support the internal tape drive. Support for optional DDS5 or DDS6 USB tape drives is

available.

Network interfaces Up to four integrated Gigabit Ethernet 1000BASE-T RJ-45 ports (two ports enabled, and an

additional two ports require the optional software FoD upgrade to enable them).

Ports Two USB 2.0 and one DB-15 video (not available on storage-rich models) port on the front.

Four USB 2.0, one DB-15 video, one DB-9 serial, and four RJ-45 GbE network ports on the

rear. Two internal USB ports (one for embedded hypervisor, one for internal USB tape drive).

Cooling IBM Calibrated Vectored Cooling with three redundant non-hot-swap fans; each fan has two

motors.

Power supply Up to two redundant hot-swap 550 W HE AC, 750 W HE AC, or 900 W HE AC power supplies

(all AC power supplies are 80 PLUS Platinum certified), or up to two redundant hot-swap 750

W HE DC power supplies.

Hot-swap parts Hard drives (hot-swap models), power supplies.

1 2 3 4 5 6 7 8 9 10 11 12 ... 49 50

Comments to this Manuals

No comments

IBM 3630 M4 User's Guide Page 7

Comments to this Manuals

Related products and manuals for Servers IBM 3630 M4