IBM L150 User Manual download pdf (Page 15)

Image Setup for DOS

To set up the monitor automatically in DOS, do the following:

If the monitor is in sleep

mode, it may automatically

turn off while you are waiting for it

to warm up. If this happens, turn

off the monitor and turn it on again

after a few seconds.

1. Turn on the monitor first; then turn on the computer.

If the message CHECK SIGNAL CABLE is displayed, or if nothing is

displayed, check:

• that the video interface cable is connected properly.

• the correct video adapter card is installed.

• the correct supported display mode is selected for your computer.

If you are using PC-DOS/V,

change to U.S. mode by

typing CHEV US and pressing

ENTER at the command prompt.

2. Wait approximately 15 minutes, until the monitor warms up.

3. Insert the User’s Guide and Installation Files CD into the computer CD-

ROM drive.

4. Display the command prompt screen of the DOS full-screen display.

5. Type d:\ (change the drive letter to match your CD-ROM drive if it is not

drive D).

6. Type TESTPAT and press ENTER.

7. Select from the screen the number for the color or text mode you want to

set up.

8. Select from the screen the number for the video mode you want to set

up. You can repeat this process for as many of the color and video

modes as you need.

The size and diversity of the

dot pattern varies with the

screen resolution.

9. When the dot pattern appears, press the Image Setup ( ) button at

the bottom of the monitor. This activates the

IMAGE SETUP ()

procedure, which will optimize the display settings with the provided dot

patterns.

The screen will momentarily turn black while auto adjustment proceeds.

10. When finished, the Auto Adjustment menu disappears and the screen

returns to a normal display.

11. Press the ESCAPE key to exit the test pattern program.

12. Type EXIT at the command prompt to return to Windows.

If you use other operating systems, perform the appropriate Image Setup

( ) for those systems using instructions given in "Image Setup ( ) for

Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME,

Windows XP on page 13".

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Comments to this Manuals

No comments

IBM L150 User Manual Page 15

Comments to this Manuals

Related products and manuals for TVs & monitors IBM L150