IBM THINKPAD 600e User Manual download pdf (Page 159)

Troubleshooting Guide

Problem Cause and Action

The system cannot start

from the PC Card.

To start from the PC Card, do as follows:

1. Start the ThinkPad Configuration program.

2. Click on the UltraslimBay ( ) button.

3. Remove the check mark from the Enable Hot/Warm Swapping of

UltraslimBay check box by clicking on it.

4. Click on OK.

Make sure that the correct system resources are being used for the PC Card.

ATA: IRQ 15

I/O 170–177h, 376h

Note: The secondary IDE should be disabled.

RPL (Token Ring): IRQ 9

Memory: D6000–DBFFFh

I/O A20–A23h

RPL (Ethernet): IRQ 5

Memory D2000–D7FFFh

I/O 300–31Fh

The PC Card is installed

and configured, but it

does not work.

Modem card: Make sure all settings in the “Modem Control” panel and in

your communication application correspond and are correct.

SCSI card: Make sure the correct driver for the SCSI card is installed.

Note: SCSI cards can be inserted while you are operating your computer;

however, it is recommended that you insert them at boot time.

Network card: Make sure all network components are correctly installed.

Combo card: Make sure the correct driver for the Combo card is installed.

Restart the system, and then insert the Combo card.

Chapter 4. Solving Computer Problems 145

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 190 191

No comments

IBM THINKPAD 600e User Manual Page 159