IBM THINKPAD MT 2366 User Manual download pdf (Page 37)

If you are using the ACPI operating system, only the

low-battery alarm is available.

To cause the computer to return from standby mode and

resume operation, do one of the following:

v Press the Fn key.

v Open the LCD cover.

v Turn on the power switch.

Also, the computer automatically returns from standby

mode and resumes operation in either of the following

events:

v The ring indicator (RI) is signaled by a serial device or a

PC Card device (Windows 2000 does not support the

ring indicator (RI) resume by PC Card device.)

v The time set on the resume timer elapses. In Windows

98, the Scheduled Tasks setting takes priority over the

Resume on timer selection in the “Power Management

Properties” window.

Note: The computer does not accept any input

immediately after it enters standby mode. Wait a

few seconds before taking any action to reenter

operation mode.

Hibernation mode

Note for Windows NT

If you are using Windows NT in NTFS format, you

cannot create a hibernation file. If you want to use

hibernation mode, you will need to reinstall Windows

NT with FAT format.

Note for OS/2

If you are using OS/2 in the default format, HPFS,

you cannot create a hibernation file. If you want to

use hibernation mode, you will need to reinstall

OS/2 with FAT format.

In hibernation mode, the following occurs:

v The system status, RAM, VRAM, and setup data are

stored on the hard disk.

v The system is powered off.

Note: If the computer enters the hibernation mode while it

is docked to the docking station, do not undock it

from the docking station before resuming normal

operation. If you do undock it and then try to

Related service information

General descriptions 33

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 167 168

No comments

IBM THINKPAD MT 2366 User Manual Page 37