IBM PC 300GL User Manual download pdf (Page 33)

26 PC 300 GL and 300 PL

Component outputs

The power supply provides separate voltage sources for the system board and

internal storage devices. The following figures show the approximate power that is

provided for specific system components. Many components draw less current than

the maximum shown.

Note: For each PCI connector, the maximum power consumption is rated at 5 watts

for +5 V dc and +3.3 V dc combined. If maximum power is used, the overall

system configuration will be limited in performance.

Table 10. System board

Supply voltage Maximum current Tolerance

+3.3 V dc 5000 mA +5.0% to -5.0%

+5.0 V dc 6000 mA +5.0 to -4.0%

+12.0 V dc 25.0 mA +5.0% to -5.0%

-12.0 V dc 25.0 mA +10.0% to -9.0%

Table 11. Keyboard port

Supply voltage Maximum current Tolerance

+5.0 V dc 275 mA +5.0% to -4.0%

Table 12. Auxiliary device port

Supply voltage Maximum current Tolerance

+5.0 V dc 300 mA +5.0% to -4.0%

Table 13. PCI-bus adapters (per slot)

Supply voltage Maximum current Tolerance

+5.0 V dc 1000 mA +5.0% to -4.0%

+3.3 V dc 1500 mA +5.0% to -4.0%

Table 14. USB port

Supply voltage Maximum current Tolerance

+5.0 V dc 500 mA +5.0%to -4.0%

Table 15. Internal DASD

Supply voltage Maximum current Tolerance

+5.0 V dc 1400 mA +5.0% to -5.0%

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 68 69

Comments to this Manuals

No comments