IBM T200F User Manual download pdf (Page 38)

Table 22. TapeAlert Log Parameters (continued)

Parameter Description Type DU LP LBIN

38 Predictive Failure Critical 1 0 0

39 Diagnostics Required Warning 1 0 0

See the TapeAlert specification for more complete descriptions of the flags.

This data can be neither written nor reset. The flags are cleared by the action of

reading the log.

Tape Usage Log

The Tape Usage Log Page Code is 30h. These are all read directly from the tape

logs.

Table 23. Tape Usage Log Parameters

Parameter Description Length DU LP LBIN

1 Thread Count 4 1 0 0

2 Total Data Sets Written 8 1 0 0

3 Total Write Retries 4 1 0 0

4 Total Unrecovered Write Errors 2 1 0 0

5 Total Suspended Writes 2 1 0 0

6 Total Fatal Suspended Writes 2 1 0 0

7 Total Data Sets Read 8 1 0 0

8 Total Read Retries 4 1 0 0

9 Total Unrecovered Read Errors 2 1 0 0

10 Total Suspended Reads 2 1 0 0

11 Total Fatal Suspended Reads 2 1 0 0

This data can be neither reset nor written.

Tape Capacity Log

The Tape Capacity Log Page Code is 31h. Parameters 2 and 4 are not supported

and are returned as 0. All parameter lengths are 4 bytes long. The supported fields

are listed in Table 24.

Table 24. Tape Capacity Log Parameters

Parameter Description Length DU LP LBIN

1 Main Partition Remaining Capacity 4 1 0 0

2 Alternate Partition Remaining capacity 4 1 0 0

3 Main Partition Maximum Capacity 4 1 0 0

4 Alternate Partition Maximum Capacity 4 1 0 0

All parameters are in megabytes and assume no data compression. This data

cannot be reset or written.

24 Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 125 126

No comments

IBM T200F User Manual Page 38