IBM H80 User Manual download pdf (Page 36)

Emergency Eject

Note: Execute the following procedure only in an emergency (such as when the

tray will not eject even though you have pressed the unload button).

1. Insert a small diameter rod, such as a straightened paper clip, into the

emergency eject hole. (Refer to the illustration below for the location of the

emergency eject hole.)

2. Push in the tool until you feel resistance.

3. Maintain a small amount of pressure on the rod while pulling on the tray with

your fingernail.

4. Pull the tray open and remove the disc.

Note: Normally the tray makes a ratcheting sound when you pull it open using the

above procedure.

1 Headphone Jack 4 Tray Opening

2 Volume Control 5 Emergency Eject Button

3 Status Light 6 Load/Unload Button

20 RS/6000 Enterprise Server Model H80 Series User's Guide

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 229 230

No comments

IBM H80 User Manual Page 36