IBM H80 User Manual Page 58
- Page / 230
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
– Enable supplemental restart policy - The default setting is NO. If set to
YES, the service processor restarts the system when the system loses
control as detected by service processor surveillance, and either:
The Use OS-Defined restart policy is set to NO.
OR
The Use OS-Defined restart policy is set to YES, and the operating
system has NO automatic restart policy.
Refer to “Service Processor Reboot/Restart Recovery” on page 64.
– Call-Out before restart (Enabled/Disabled) - If a restart is necessary due to
a system fault, you can enable the service processor to call out and report
the event. This option can be valuable if the number of these events
becomes excessive, signalling a bigger problem.
Power-On System
Allows immediate power-on of the system. For other power-on methods, see
“Powering On the System” on page 4.
Power-Off System
Allows the user to power-off the system.
Enable/Disable Fast System Boot
Allows the user to select the IPL type, mode, and speed of your boot capabilities.
Attention: Selecting the fast IPL results in several diagnostic tests being skipped
and a shorter memory test being run.
42 RS/6000 Enterprise Server Model H80 Series User's Guide
- User's Guide 1
- Second Edition (June 2000) 2
- Contents 3
- Safety Notices 9
- Laser Safety Information 11
- About This Book 15
- Trademarks 16
- Operator Panel 19
- Scrolling Ball Indicator 19
- Powering Off the System 20
- Powering On the System 20
- POST Indicators 22
- POST Keys 23
- Console Strategy 25
- Checkpoints 26
- Using the Keyboards 27
- Using the Three-Button Mouse 29
- Handling the Mouse Correctly 29
- Caring for the Mouse 30
- Cleaning the Mouse 31
- Using the CD-ROM Drive 34
- Loading the CD-ROM Drive 35
- Unloading the CD-ROM Drive 35
- Cleaning the CD-ROM Drive 35
- Emergency Eject 36
- Ergonomic Information 37
- Service Processor 37
- Service Director 38
- Passwords required (if set): 42
- Privileged-access password 42
- Service Processor Menus 43
- Menu Inactivity 44
- General User Menu 45
- Privileged User Menus 47
- Main Menu 47
- Service Processor Setup Menu 49
- Passwords 50
- active port 51
- System Power Control Menu 55
- System Information Menu 60
- Language Selection Menu 68
- Call-In/Call-Out Setup Menu 69
- Modem Configuration Menu 70
- Serial Port Selection Menu 71
- Serial Port Speed Setup Menu 72
- Telephone Number Setup Menu 73
- Call-Out Policy Setup Menu 75
- Customer Account Setup Menu 76
- Service Processor Functions 77
- System Power-On Methods 78
- Boot (IPL) Speed 80
- Failure During Boot Process 80
- Service processor default 82
- AIX default 82
- System Firmware Updates 83
- System Firmware Surveillance 87
- Operating System Surveillance 88
- Call-Out (Call-Home) 89
- Console Mirroring 90
- System Configuration 90
- Service Processor Error Logs 91
- System POST Errors 92
- LCD Progress Indicator Log 93
- Password Utilities 99
- Display Error Log 100
- SCSI Utilities 105
- Select Console 105
- Multiboot 106
- Select Language 109
- OK Prompt 109
- Selecting a Console Display 111
- Undefined Terminal Types 112
- Running Online Diagnostics 112
- 3151 ASCII 113
- Additional Printer Attributes 118
- Service Mode 119
- Concurrent Mode 120
- Maintenance Mode 121
- OPERATING INSTRUCTIONS 123
- Add Resource to Resource List 128
- AIX Shell Prompt 128
- Analyze Adapter Internal Log 128
- Backup and Restore Media 128
- Certify Media 129
- Configure Dials and LPF Keys 130
- Configure Reboot Policy 130
- Configure Surveillance Policy 134
- Disk Maintenance 136
- Disk to Disk Copy 136
- Display/Alter Sector 137
- Display Hardware Error Report 138
- Display Microcode Level 138
- Display or Change Bootlist 138
- Display Resource Attributes 141
- Display Service Hints 141
- Display Software Product Data 141
- Examples 143
- Display Test Patterns 144
- Download Microcode 144
- RAID adapterName 145
- Flash SK-NET FDDI Firmware 147
- Format Media 147
- Optical Media 149
- Diskette Format 149
- Generic Microcode Download 150
- Hot Plug Task 150
- PCI Hot Plug Manager 151
- SCSI Hot Swap Manager 153
- RAID Hot Plug Devices 155
- Local Area Network Analyzer 155
- Log Repair Action 155
- Periodic Diagnostics 155
- Process Supplemental Media 156
- Abbreviations 158
- Memory Exerciser 158
- SCSI Bus Analyzer 159
- SCSD Tape Drive Service Aid 160
- Spare Sector Availability 162
- SSA Service Aid 163
- Update Disk-Based Diagnostics 163
- Adapter Microcode Download: 166
- Physical Disk Format: 166
- Physical Disk Certify: 166
- Physical Disk Identify: 166
- Step 10 175
- Step 11 176
- Step 12 177
- Step 13 177
- Step 14 178
- Step 15 178
- Step 16 179
- Step 17 179
- Environmental Design 185
- Unit Emissions 185
- Appendix B. Notices 187
- Testing the Setup 190
- Testing Call-In 190
- Testing Call-Out 191
- Serial Port Configuration 192
- Configuration File Selection 194
- Xon/Xoff Modems 197
- Ring Detection 198
- Terminal Emulators 198
- Recovery Procedures 198
- Transfer of a Modem Session 199
- Recovery Strategy 200
- Prevention Strategy 200
- Sample File modem_m0.cfg 202
- Sample File modem_m1.cfg 205
- Sample File modem_z.cfg 208
- Sample File modem_z0.cfg 210
- Sample File modem_f.cfg 212
- Sample File modem_f0.cfg 215
- Sample File modem_f1.cfg 218
- # responses 220
- delay 2 220
- (continued) 221
- Index 209 225
- 211 227
- Information Development 228
- Department H6DS-9561 228
- 11400 Burnet Road 228
- Austin, TX 78758-3493 228
- BUSINESS REPLY MAIL 228
- June 2000 230
- SA38-565-1 230
© 2020, manymanuals.com. All rights reserved. | 1.161 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals