IBM x Series 200 User Manual Page 71
- Page / 152
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installing options 63
Parallel connector
Your server has one parallel connector. This connector supports three standard
Institute of Electrical and Electronics Engineers (IEEE) 1284 modes of operation:
standard parallel port (SPP), enhanced parallel port (EPP), and extended capability
port (ECP).
Viewing or changing the connector assignments: You can use the built-in
Configuration/Setup Utility program to configure the parallel connector as
bidirectional; that is, so that data can be both read from and written to a device. In
bidirectional mode, the server supports the ECP and EPP modes.
Complete the following steps to view or change the parallel-connector assignment:
1. Restart the server and watch the monitor screen.
2. When the message Press F1 for Configuration/Setup appears, press F1.
3. When the Configuration/Setup Utility menu appears, select Devices & I/O Ports;
then, press Enter.
4. Select the parallel connector; then, use the arrow keys to advance through the
settings available.
Note: When you configure the parallel connector as bidirectional, use an IEEE
1284-compliant cable. The cable must not exceed 3 meters (9.8 feet).
5. Press Esc twice to return to the Configuration/Setup main menu; then, select
Save & Exit Setup to exit from the Configuration/Setup Utility main menu.
Parallel connector: There is a 25-pin, female D-shell parallel connector on the rear of
your server, see “I/O connector locations” on page 60 for the location of this
connector. The following table shows the pin-number assignments for the parallel
connector.
13
1
25
14
- Hardware Maintenance Manual 1
- About this manual 5
- Online support 6
- Contents 7
- General checkout 9
- General information 11
- Server features 12
- General information 5 13
- Turning on the server 15
- Turning off the server 16
- Diagnostics 17
- Text messages 19
- Using the diagnostics CD 20
- Viewing the test log 21
- Power checkout 21
- Recovering BIOS 22
- Clearing CMOS 23
- Replacing the battery 23
- Temperature checkout 25
- Diagnosing errors 25
- Network connection problems 26
- Diagnostics 19 27
- Ethernet controller messages 29
- Diagnostics 23 31
- Diagnostics 25 33
- Ethernet teaming messages: 34
- Ethernet controller 35
- Configuring the server 37
- Select Option: 38
- Configuring the server 31 39
- Using passwords 40
- Configuring the server 33 41
- Installing options 43
- Installing options 37 45
- Before you begin 46
- Installing options 39 47
- Moving the stabilizing feet 48
- Removing the side cover 48
- Key lock 49
- Cover-release 49
- Working with adapters 51
- Adapter considerations 52
- Installing an adapter 53
- Installing internal drives 55
- Internal drive bays 55
- EMC shield 57
- Filler panel 57
- Drive cage release tab 59
- Drive cage retention tab 59
- Installing memory modules 60
- DIMM connector 1 61
- DIMM connector 2 61
- DIMM connector 3 61
- Retaining clip 61
- Removing a microprocessor 63
- Installing a microprocessor 64
- Fan sink 65
- Fan-sink 65
- Installing a security U-bolt 66
- Completing the installation 67
- Installing the cover 67
- Connecting external options 68
- I/O connector locations 68
- Input/output ports 69
- Mouse port 70
- Keyboard port 70
- Parallel connector 71
- Serial connectors 72
- Ethernet connector 73
- Installing options 67 75
- Pin Signal Pin Signal 76
- Audio connectors 77
- MIDI connector 77
- Video connector 78
- Installing options 71 79
- Power supply 81
- Hard disk drive cage 81
- Rear fan 82
- System board 83
- CD-ROM drive 84
- Floppy disk drive 85
- Button kit 86
- Guide assembly / speaker 86
- Bezel release latch 87
- Top/side cover 88
- Handle assembly 89
- Adapter retainer 90
- Symptom-to-FRU index 93
- Symptom-to-FRU index 87 95
- No beep symptoms 96
- Diagnostic error codes 97
- Symptom-to-FRU index 91 99
- Error symptoms 100
- Symptom-to-FRU index 93 101
- POST error codes 102
- Symptom-to-FRU index 95 103
- Symptom-to-FRU index 97 105
- Processor board LEDs 107
- ServeRAID 108
- Undetermined problems 108
- Parts listing 109
- 60X, 61X, 62X, 70X, 71X, 72X) 110
- Keyboards 111
- Power cords 112
- Related service information 113
- Electrical safety 114
- Safety inspection guide 115
- Grounding requirements 117
- ≥18 kg ≥32 kg ≥55 kg 133
- ATTENTION: 134
- ≥55 kg (121,2 146
- PRECAUCIÓN: 147
- Send us your comments! 148
- Problem determination tips 149
- Trademarks 150
- 0406P8517 152
Related products and manuals for NAS & storage servers IBM x Series 200
NAS & storage servers IBM 4939H49 Datasheet
(610 pages)
(610 pages)
NAS & storage servers IBM 68Y8588 Datasheet
(11 pages)
(11 pages)
© 2020, manymanuals.com. All rights reserved. | 0.429 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals